What did you work on today

Blue-Truck-Nut97 · Jan 24, 2020

I'll take pictures for you.

Any ideas what caused your hydrologic problems? Wear or are you pretty sure it was someone messing around in there that shouldn't have?

Sent from my E6810 using Tapatalk

heavydoc · Jan 24, 2020

Not sure yet, found lots of aluminum in the system relief. Which would be from the pilot pumps, which are newerish. The pumps are a different paint color than the housing. It looks to me someone has been all over this thing. My shop rebuilt the main control valve, swing gear, and replaced the rotary manifold, which all had been phucked with. Right now I've got the system relief, power boost valve, and circuit reliefs all maxed out and it won't move itself[emoji15]

heavydoc · Jan 24, 2020

It's really weird cause the pump control pressure is the only thing that is over spec. It should be 485 psi and it is at 535 psi, which suggests the pump regulators are good[emoji848][emoji848]

Blue-Truck-Nut97 · Jan 24, 2020

That is odd. Very odd.

Sent from my E6810 using Tapatalk

heavydoc · Jan 25, 2020

Ya I've been going through the manual and I think I need to check and reset the pump min and max flow and engine pulldown. If those won't adjust then it has to be the pumps!!! I just gotta figure out which pumps it has so I know my specs. I'm beginning to think this thing needs multiple adjustments made an someone has been adjusting shit they had knowledge off[emoji2959][emoji2959][emoji2959]

heavydoc · Jan 25, 2020

Maybe now that I have a plan of attack I can finally turn my brain off an get some sleep[emoji848]

heavydoc · Jan 25, 2020

Power boost and high track speed also don't work [emoji848][emoji848][emoji848]

heavydoc · Jan 26, 2020

Got maybe the last ring built for my table. Still deciding if I wanna add another ring or not

heavydoc · Jan 26, 2020

Also got the wife's puzzle table hung. Just waiting on her to tell me what she wants it covered with. I'm thinking leather!

smokey · Jan 26, 2020

fatherdoug said:
Been doing the same for the wife. Lots of grab bars for baths, showers, etc.

I told him I'm putting a bar in your bathroom. He oh no your not I dont want people drinking in my bathroom. He has dementia it was funny he thought a bar not grab handles. Once I explained he was better but not happy he hates any change.

fatherdoug · Jan 26, 2020

I understand the situation, but it was funny.

heavydoc · Jan 27, 2020

fatherdoug · Jan 27, 2020

Working on crushers, conveyors, or excavators?

heavydoc · Jan 27, 2020

Today was Excavators, and loaders

Sparky83 · Jan 27, 2020

i made my bins empty at work...

heavydoc · Feb 3, 2020

This was at the end of a 45 minute kind of a dirt road ride

fatherdoug · Feb 3, 2020

"When it rains, it throws belts".

Sorry

heavydoc · Feb 3, 2020

[emoji1787][emoji1787][emoji1787][emoji1787]

fatherdoug · Feb 3, 2020

heavydoc said:
This was at the end of a 45 minute kind of a dirt road ride

Was this for the swamp loggers?

Blue-Truck-Nut97 · Feb 3, 2020

Please don't show him the wiggle Doc.

Sent from my E6810 using Tapatalk

Join Our Ford Truck Forum Today

What did you work on today

crank polisher

Instigator

Instigator

crank polisher

Instigator

Instigator

Instigator

Instigator

Instigator

Hitech hillbilly

Tonto Papadapolous

Instigator

Tonto Papadapolous

Instigator

Virginia Chapter member

Instigator

Tonto Papadapolous

Instigator

Tonto Papadapolous

crank polisher