Join Our Ford Truck Forum Today

Document your Ford truck project here and inspire others! Login/Register to view the site with fewer ads.

Need 302 Help ASAP!!

http://sbftech.com/index.php/topic,15152.0.html

300rwhp....

Hey all, I posted this on here a month or so ago to let everyone know how satisfied I am with the combo Jay Allen put together for me. I called Jay with what I had in mind and he designed a combo around my needs. The stipulation for the combo was 300 horsepower with a completely untouched stock shortblock, i.e. no flycut pistons or anything else, just bolt on the heads and intake, slide in and degree the cam, chip and tune, and drive away with a huge smile. The motor made 306 horsepower and 311 ft/lbs. of torque, with more to be gained when I put in an electric fan and aluminum driveshaft.

Here's my complete combo:

Trickflow Twisted Wedge Heads (58cc, Ferrea 6000 series valves, Jay's full competition bowl blend)

TrickFlow Track Heat Intake Manifold

CI custom ground hyd roller camshaft (billet core)

Comp Cams billet timing set (9 keyway) ((modified camshaft thrust plate with countersunk bolts))

Comp Cams Pro Magnum 1.6 Roller Rockers

"Blue Printed & Limited Travel Hydraulic Roller Lifters"

BBK 70mm Throttle Body

BBK 70mm EGR Spacer

C&L 76mm MAF Sensor calibrated for 24lb injectors

24lb fuel injectors

Walbro 255 LPH fuel pump (in-tank)

GMB Hi-Flow water pump

Kirban AFPR

and supporting mods:
3:73 gears , BBK Cold air intake, BBK underdrive pulleys, 3G alternator upgrade, Maximum Motorsports full-length SFCs, Maximum Motorsports Strut Tower Brace, Steeda Rear Shock Tower brace, BBK Thermo-Tec wrapped longtubes headers, Mac Prochamber, Spintech Prostreets, MGW shifter, '04 Cobra Seats and more...

Dyno Sheet

DYNO.jpg
 
Last edited:

LEB Ben

Arrogant A-hole At-Large
34,919
1,124
outside your house

F 150Cobra

"Wild HoRsE" Got Torque?
3,642
104
Aruba
i can make a 350 Hp engine with AFR heads and a big cam :) ohh yeah i forgot :) Carbed ofcourse :)
 

LEB Ben

Arrogant A-hole At-Large
34,919
1,124
outside your house

LEB Ben

Arrogant A-hole At-Large
34,919
1,124
outside your house
"The stipulation for the combo was 300 horsepower with a completely untouched stock shortblock" :hammer:


I know...and I can still do it without touching the block...given it won't be a 302 though...but I'm not getting into that debate again.
 
Jay Allen .. To my SBFTech Faithful.

I have decided to build a 347 and document the entire build.

I am putting BIG RED on hold so I can get RED Death back on the road.

The premise of this build is to make as much power as I am capable of and prove along the way that there are too many myths that are still allowed to propagate. This is a pump gas engine and I will drive this car every day that it is not raining or snowing. I will post pictures as I have the parts, as many specs as I dare to share, and please feel free to chime in at any time. There is no question that is dumb, there is no stupid statements, I want this thread to grow and grow.

When the engine is done I hope to dyno test it at Billy Glidden's providing that his schedule and mine can get on the same page.

Here is a list of parts. I will start right at the top.

Pro Systems Dominator Carburetor
Wilson Manifolds / BG Modified Victor Jr
TEA / Ci Prepped TFS TW 190cc Fast As Cast Heads
Competition Bowl Blend
Milled to 58cc
Comp Cams Ultra Gold 7/16 x 1.72 Roller Rockers
Ci Solid Roller Camshaft on a Billet Core
Comp Cams 838-16 Solid Roller Lifters
Comp Cams 8138 100% Adjustable Timing Kit
Probe TFS TW 1.090" F/T Pistons
10.68:1 Compression @ zero deck & 58cc chamber
Scat 5.400" x 2.123" H-Beam Rods
3.400" Steel CHP/Eagle Crankshaft
ATI Dampner
RAM Aluminum Wheel
Canton Pan
Probe Steel Main Girdle
ARP Main Studs
ARP 7/16 Head Studs
2.00" Accufab Headers with 4.00" collector
5.00" oval NASCAR Exhaust
5.00" oval Custom Mufflers
Michigan 77 Bearings through out
Lightning Air Pump (after rings seat)
Royal Purple Oil
Mexican 302 Block

Jay Allen .. These are the guesses for the Project 347.

We need your name, screen name, and 20.00 Pay Pal'ed to Ron Barck.

His Pay Pal information is: [email protected]

The closest wins all "net" Pay Pal proceeds. No proceeds will be kept by myself or SBFTech.com

If your guess is dead on, CAMSHAFT INNOVATIONS will supply you with a free camshaft valued up to 400.00.

Names and guestimates will be posted here in order.

Mark Brooks: MMB 547

Jason Winchester: 408w 565

Thomas Spalinger: 347Stroker 575

Gary Harvey: 351 Windsor snake 584

Neil Lowes: Ntv69 589

Raul Aranda: silver408coupe 591

Mark Wishka: 86t-bird 592

Joe Matthews: Liljoe07 595

Sebastian Fontana: Speedoo51 599

Brian Johnson: Knowitall 603

Brendan Jones: mxracer652 605

Mark Pastir: Quickshift 607

Michael Palazzi: Jr99svt 610

Stephen Shimek: Mystang 613

Michael Palazzi: Jr99svt 615

Richard Horvat: 302ute 618

Marcus Wood: Mwood 620

Ron Barck: BadBird 624

Greg Horton: 88foxgt 628

Joseph Karow: Oldmanjoe 631

Scott Bonomo: Onefastsvt 634

Jason Hollinger: jtmustang 642

Tony Gossett: Tony1959 646

Edward Hood: Tenpercent 648

Nate Laufer: 289nate 655

Joseph Karow: Oldmanjoe 661

Art Berthold: Grabbem88 666

Theodore Klemm: Mean88 675

John Rusinko: Rusty105 685

Robbie Brooks: Thunderhawk 687

Timothy Sparagna: Nitrotim 735

Jay Allen .. HP thread updated.

Guesses will be locked soon.

302ute .. Cool, means we must be close. Can't wait to see what this sucker makes. Even better when it goes in the car


:pimp: smiliestirthepot
 

LEB Ben

Arrogant A-hole At-Large
34,919
1,124
outside your house
If you knew anything about the recent history of FoMoCo you would know they under estimate and under rate all of their numbers, Mr. Texticle.


Shut up chicken fornicator...you're obviously a perpetuator of great conspiracies:rolling laugh: :rolling laugh: :rolling laugh:
 

Ford Truck Articles

Top