Join Our Ford Truck Forum Today

Document your Ford truck project here and inspire others! Login/Register to view the site with fewer ads.

Converting a F250 into a 1/2 ton

Sparky83

Virginia Chapter member
5,566
219
Norlina NC
we want pics... we want pics... we want pics....
 

Sparky83

Virginia Chapter member
5,566
219
Norlina NC
cool cool :D
 

Sparky83

Virginia Chapter member
5,566
219
Norlina NC
pretty truck... but it looks a little cold...
 

Sparky83

Virginia Chapter member
5,566
219
Norlina NC
mines all covered in salt atm from friday...
 
Did a rear end gear change today,took out the 2.75 and went with 3,00 and its much better. Even with the 460 the 2.75 gears were too much with the 31 inch tall rear tires and I think I got the speedo closer to correct since it was a little too slow.
 
The Jasper rebuilt 460 has a vibration and the Jasper rebuilt C-6 never shifter right so I have found another FE and going back to a 4 speed,I think they installed the wrong crank and will keep it for another project after I go through it but wanting another manual trans and will be getting a car 352.
 
The Jasper rebuilt 460 has a vibration and the Jasper rebuilt C-6 never shifter right so I have found another FE and going back to a 4 speed,I think they installed the wrong crank and will keep it for another project after I go through it but wanting another manual trans and will be getting a car 352.

Some torq converters an flywheels are balanced for the size engines!

Example...A 350 trans is balanced different from a 400 size.
 

Ford Truck Articles

Top