Join Our Ford Truck Forum Today

Document your Ford truck project here and inspire others! Login/Register to view the site with fewer ads.

Need a new exhaust

My exhaust has a small hole in it and is starting to get bigger. What do you all have for exhausts? Keep it stock or something else to change the sound? I have a '90 F350 7.3 IDI


Sent from my iPhone using Tapatalk
 

Fellro

Moderator
Staff member
I reworked my 86 6.9 a bit to get better flow. I made the y-pipe actually flow instead of just dump 90 degrees into the other pipe, then opened it up after the y into 3" pipe. I have been told that using factory powestroke exhaust after the y pipe works well also.
 

Sparky83

Virginia Chapter member
5,566
219
Norlina NC
if your good with a welder and dont want to spend the money right now you could try welding up the hole.. but usually once a hole starts forming in the pipe its really getting too thin to last much longer..
 

Fellro

Moderator
Staff member
For an IDI, your factory system does about the same... Powerstrokes by nature have a little larger pipes, so when someone takes the factory one off for an upgrade, it is a good grab for us NA IDI guys.
 

Ford Truck Articles

Top