Join Our Ford Truck Forum Today

Document your Ford truck project here and inspire others! Login/Register to view the site with fewer ads.

Gauge Install Project

DNFXDLI

The Token Canadian
Staff member
Like the color of them.
 

Sparky83

Virginia Chapter member
5,571
226
Norlina NC
yeah shiney lol
 

Sparky83

Virginia Chapter member
5,571
226
Norlina NC
10 colors... i have them set to constantly cycle through them...

12_Elite_60_Main.jpg
 

DNFXDLI

The Token Canadian
Staff member
Ahhh..kinda like the dash of my car...cool.
 

Sparky83

Virginia Chapter member
5,571
226
Norlina NC
edited it to add the picture from their site...
 

Sparky83

Virginia Chapter member
5,571
226
Norlina NC
:D wasnt sure i got it in before you posted...
 

Sparky83

Virginia Chapter member
5,571
226
Norlina NC
IMG-20140823-01515_zps375fab0a.jpg


was so nice of ford to provide me with pre run wires to use lol..

IMG-20140823-01528_zps7d5cd07b.jpg


IMG-20140823-01517_zpsaa8a2250.jpg


tiny black wire to the left going down to the tranny...

IMG-20140823-01531_zps6631e881.jpg


tranny temp sensor...


IMG-20140823-01518_zpsaf23d265.jpg


fuel pressure and boost wires running...

IMG-20140823-01524_zpsd813b060.jpg


fuel pressure sensor...

IMG-20140823-01525_zps7850d398.jpg


boost pressure...

IMG-20140823-01526_zpsfd7d42a6.jpg


Ment to post this sooner... the wireings :)

IMG-20140823-01527_zps03ee7a1e.jpg


easily found me a grounding point... how convenient of ford to have one there lol..

IMG-20140823-01529_zps84f6eb5c.jpg
 

Sparky83

Virginia Chapter member
5,571
226
Norlina NC
ty.. may not be as good as yours would have looked... but i tried :D
 

DNFXDLI

The Token Canadian
Staff member
It looks waaaay better than than the majority out there!
 

Sparky83

Virginia Chapter member
5,571
226
Norlina NC
It looks waaaay better than than the majority out there!


lol true... i try to make mine look good... like the labeling underneath??? sharpe's are great lol
 

Sparky83

Virginia Chapter member
5,571
226
Norlina NC
ill have to take another pic since i re-did the gauge mount... when i originally made the bracket i forgot to account for the gauges weight... noticed driving it around this week the pod was pulling away from the bracket since i only supported it in the back.. fixed that today...
 

Sparky83

Virginia Chapter member
5,571
226
Norlina NC
sure doesnt... will remind me for later when i install loads more...
 

Sparky83

Virginia Chapter member
5,571
226
Norlina NC
lol very true... rather read higher than lower for sure... i have the alarm set for 210 since thats where people said was trouble for the trannys over heating.. but been told short of pulling max load/cooler failure i shouldnt get anywhere near that even with it there... highest i saw while running around town earlier was 162.. but they were short runs...
 

Sparky83

Virginia Chapter member
5,571
226
Norlina NC
I have a deep pan on mine, I had a trip up the mountain a few weeks ago and hit 180. That's a big steep winding pull for around 20 minutes. And I was going pretty hard!!!

steepest grade i hit is 13% lol.. last time i ran up that hill after getting the bad injectors replaced and rebuilt the turbo Lil Dually said FU HILL WATCH THIS!!!! lol unlike the last few climbs...
 

Ford Truck Articles

Recent Forum Posts

Top