Ford Truck Fanatics

Ford Truck Fanatics (http://www.fordtruckfanatics.com/forum/index.php)
-   Off-Road (http://www.fordtruckfanatics.com/forum/forumdisplay.php?f=22)
-   -   Project reincarnation. (http://www.fordtruckfanatics.com/forum/showthread.php?t=40824)

77mud 04-14-2017 06:43 PM

Project reincarnation.
 
2 Attachment(s)
Figured I'd post my newest project...

Little back story 6 years ago I rolled a 96 single cab short bed F150, 4 years ago I bought a running driving 92 single cab long bed with 4" lift minus the bed and rear bumper. And that's basically as far as it got until a couple weeks back my wife made the comment she wanted to start racing.

So I started tear down on the 92 last weekend, only thing left now is to pull the rear axle and lift. Plan to start some minor paint on it then instal the lift on the 96 and start the process of putting it back together.

Drive train will be the 300 out of the 96 carb swap and rockers from a chevy 292 powered by a old Crane cams ignition box I have laying around. Plan to put a C6 with a shift kit and a 208, axles will be stock 8.8/TTB 44 until i locate a solid 44 for a decent price. Truck will be on 35" super swampers.

DNFXDLI 04-14-2017 08:53 PM

Holy crap Larry....long time no see!!

Sounds cool!

77mud 04-14-2017 09:49 PM

Quote:

Originally Posted by DNFXDLI (Post 690260)
Holy crap Larry....long time no see!!

Sounds cool!

That it has been!

cbaker65 04-14-2017 09:51 PM

Nice project ,but that blue one don't seem to have enough head room!....:rofl:

77mud 04-15-2017 06:37 PM

You got that right, it got tight in a hurry.

77mud 05-14-2017 07:37 PM

Figure I'd do a update...

Started by stripping the donor 92

http://i654.photobucket.com/albums/u...413_151402.jpg

http://i654.photobucket.com/albums/u...414_092839.jpg

Then got the 300 on the stand for stripping/cleaning/paint.

http://i654.photobucket.com/albums/u...424_105110.jpg

http://i654.photobucket.com/albums/u...424_121935.jpg

http://i654.photobucket.com/albums/u...424_143536.jpg

http://i654.photobucket.com/albums/u...427_193722.jpg

And some paint on it, then put it back together

http://i654.photobucket.com/albums/u...430_095051.jpg

http://i654.photobucket.com/albums/u...427_194110.jpg

http://i654.photobucket.com/albums/u...512_153723.jpg

Got the cab primed and the back/roof painted before it goes back together

http://i654.photobucket.com/albums/u...501_135328.jpg

Got the chassis home that is getting built on.

http://i654.photobucket.com/albums/u...424_140949.jpg

Picked up a 77 chassis and axles.

http://i654.photobucket.com/albums/u...506_102711.jpg

http://i654.photobucket.com/albums/u...506_134101.jpg

And got the solid 44 under the 96 chassis with some Deaver 5" springs. Just need to wrap up steering and track bar to complete that, but I'll hold off until engim e transmission and cab is on it.

http://i654.photobucket.com/albums/u...511_183044.jpg

http://i654.photobucket.com/albums/u...512_113949.jpg

http://i654.photobucket.com/albums/u...512_113957.jpg

Dropped the pan and pulled the valve body on the C6 to put the transgo shift kit in it.

http://i654.photobucket.com/albums/u...512_162335.jpg

This morning I sat the engine in the chassis to measure out where I needed to move the transmission crossmember to.

http://i654.photobucket.com/albums/u...514_093500.jpg

http://i654.photobucket.com/albums/u...514_100709.jpg

So now I am waiting on a full spool for the 9" and then it is going under the rear end with the 4" lift from the 92. Hopefully get a little more progress done this week after work.

fatherdoug 05-14-2017 08:07 PM

Looks good. Those are TALL springs.

smokey 05-14-2017 09:25 PM

You have been busy. Looking good.

77mud 05-15-2017 04:59 AM

Quote:

Originally Posted by fatherdoug (Post 691230)
Looks good. Those are TALL springs.

They look huge, but are only 5" lift springs.

77mud 05-15-2017 05:00 AM

Quote:

Originally Posted by smokey (Post 691233)
You have been busy. Looking good.

I've been doimg what I can on weekends, thanks!


All times are GMT -5. The time now is 04:35 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Ford Truck Fanatics is not affiliated with or endorsed by Ford Motor Company.