Ford Truck Fanatics

Ford Truck Fanatics (http://www.fordtruckfanatics.com/forum/index.php)
-   Generation 1 (http://www.fordtruckfanatics.com/forum/forumdisplay.php?f=5)
-   -   1950 ford f2 build thread (http://www.fordtruckfanatics.com/forum/showthread.php?t=35117)

black_devil 09-17-2013 09:00 PM

1950 ford f2 build thread
 
I am starting a build thread since I'm restoring a 1950 ford F2. Build code MKC11G129. http://img.tapatalk.com/d/13/09/18/upa5yja9.jpghttp://img.tapatalk.com/d/13/09/18/asyty5at.jpghttp://img.tapatalk.com/d/13/09/18/9e7eseqe.jpghttp://img.tapatalk.com/d/13/09/18/tutybuzu.jpg

that thing in my poket

primetime 09-17-2013 09:51 PM

Yep, that`s a project.

black_devil 09-18-2013 04:06 PM

Should I go with the semi gloss on the right or the flat on the left...? both one coat both sanded down...

that thing in my poket

black_devil 09-21-2013 12:14 PM

Pulled the eng and trans out took about 2 hrs and help now just gotta put it on the stand and it didn't take to much was really suprised

that thing in my poket

89frankenford 09-21-2013 01:00 PM

Nice project, and from the pictures seems fairly clean as well! what are the plans for this? are you keeping it all original?

black_devil 09-21-2013 04:29 PM

Quote:

Originally Posted by 89frankenford (Post 582346)
Nice project, and from the pictures seems fairly clean as well! what are the plans for this? are you keeping it all original?

I'm keeping it mostly stock might make a few modifications but not much

that thing in my poket

black_devil 09-21-2013 08:43 PM

Got it on the stand and tore down most of the way just major stuff to take off now

:D

mtflat 09-21-2013 10:08 PM

If you take the heads off - use care on the head bolts. They snap off all too easy and you're left with a problem.

It's best to use an air impact wrench on them. It puts torque on all sides evenly. Bolts usually break when the load is off-center.

Good luck and take your time.

black_devil 09-21-2013 11:40 PM

Will do appreciate the help

that thing in my poket

black_devil 09-22-2013 08:01 PM

Started undercoating the inner fenders and the fender supports its nice to see some things getting fresh paint and protection.

that thing in my poket


All times are GMT -5. The time now is 07:27 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Ford Truck Fanatics is not affiliated with or endorsed by Ford Motor Company.