Ford Truck Fanatics

Ford Truck Fanatics (
-   Trailers, Towing and RV's (
-   -   utility bed and a goose neck (

1970Custom 01-04-2014 07:18 PM

utility bed and a goose neck
What's the statistics on that working out in my favor? Or is it a better bet to go with a flatbed and do tool storage under?

Fellro 01-04-2014 07:27 PM

Check out the pics of the 92. We have a hidden ball in it in the flat bed and it has side boxes. Just have to watch the angles on turns some times. I also have the hitch closer to centered above the axle, but it is a dually. My sister runs a horse trailer, I have run my horse trailer converted to a two car hauler on it.

1970Custom 01-04-2014 07:58 PM

This is probably the way I'll go....

Fellro 01-04-2014 08:13 PM

It depends on how exactly you want to use it. The higher side boxes have their benefits, but definitely can get in the way if you want to be able to access from over the side. I definitely suggest you make it totally surrounded so that things don't slide off. Tie downs are something you definitely will want.

DNFXDLI 01-04-2014 08:14 PM

I'd prefer no trailer...they wind up being a PITA.

SuperCab 01-04-2014 08:16 PM

I've seen low utility boxes with gooseneck trailers. Be slick if you could put together a truck/trailer combo that worked. I love utility boxes.

Or as duncers said, get a truck that does everything you need and 86 the trailer if possible. They are a bastard.

Fellro 01-04-2014 08:18 PM

Once again, depends what you want to do... I just can't quite get one let alone 2 cars on the back of my truck... tractors don't fit very well either.

SuperCab 01-04-2014 08:22 PM

Trailers are a must have, I just hope he's not planning on using it everyday. That's what I was trying to say.

Fellro 01-04-2014 08:24 PM

We have it available, but definitely not a daily use. Being that is how we have always used ours, I figured it was more of an option than a daily use.

kiwi f150 01-04-2014 08:54 PM

Just throwing an idea out there Eric - What about an E350 diesel box truck for your mobile workshop ...... a tail lift and some cutouts along the sides where you could put access doors to get at your tools without going through the back.
That would give you a good gvwr and tool storage as well as the towing ability if needed.

Maybe something like this

All times are GMT -5. The time now is 12:06 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Ford Truck Fanatics is not affiliated with or endorsed by Ford Motor Company.