Most modern gaskets are silicone similar to that. I don't know what they withstand as far as tightening goes. You would want to be aware that you can overtighten them and damage them. Modern gaskets are also either in channels that keep them...
I replaced the drivers side seal today. The factory seal was pretty ratty but here is a picture:Surprisingly, the factory seal looked more like the Fairchild part, but the proof is in the pudding: the DC part fits better and doesn't hinder the...
So after almost a month, the door still had to be beaten into submission. I replaced the seal today with the Dennis Carpenter part and it closes perfectly. So, for my part, I say save yourself the time, money and headache and go straight to DC...
Got the new brake lines ran and installed an adjustable proportioning valve, twice. I bought one on ebay after a couple tries to get the right fittings I found the holes are drilled to deep. Threw it away and bought one from Jegs which came...
older fella in charlotte,ncgot a 1974 f100 with rebuilt '71 302 with 2 barrel carb and electronic ignition, currently working on electrical issues with an additional list of "to dos". enjoying working on something i understand
Agreed. The original that I pulled was already gone or I'd have included it in the pictures. When I get the other pulled if I remember I'll get a picture of it in here for posterity. There isn't a huge difference in the feel of the rubber seal...
The Dennis Carpenter seals arrived today. I won't have time to deal with them before going out of town tomorrow, but by the time I get back the Fairchild seal on the passenger side will have been in place for about 3 weeks and I'll know what I'm...