Join Our Ford Truck Forum Today

Document your Ford truck project here and inspire others! Login/Register to view the site with fewer ads.

Register Log in

valve covers on 6.4s

blacksnapon

blacksnapon

Moderator
Staff member
9,461
301
waynesville,mo.
The passenger side isnt too bad to remove, the driver side is another story!
 

Rusty Shackleford

Certified Ford Tech
61
1
I was reading a broadcast message today that said they are revising the procedure for removing the right rocker cover, so as to not break the heater hose.
 
blacksnapon

blacksnapon

Moderator
Staff member
9,461
301
waynesville,mo.
Rusty Shackleford said:
I was reading a broadcast message today that said they are revising the procedure for removing the right rocker cover, so as to not break the heater hose.
Click to expand...
I got the valve cover out without draining coolant or removing the hose. The driver side, you're gonna do it. I tried not to, but there is just no way to do it without draining coolant.
 
blacksnapon

blacksnapon

Moderator
Staff member
9,461
301
waynesville,mo.
The most trouble I had was on the driver side. Those 4 bolts holding the turbo crossover tube on the bracket took me an hour to line up (no room to maneuver)
 

sdtheclub

Certified Ford Tech
13
1
Florida
Drivers side is a piece of cake. I can have it off in fifteen minutes. Everything on this truck is quite simple. I actually think it's easier than the 6.0
 

Ford Truck Articles

Recent Forum Posts

Top